Sound insulation: 47db
Compressive Strength: 5.1mpa
A. Partition,corridors, air duct, pipe well in high-rise frame structure and frame shear structure buildings
B. Partition in general civil and steel structure building
C. Wall panels, insulation wall block, window sill, etc.
D. Any interval at the large space building
E. Sound insulation wall at KTV room and movie theater
F. Fire-resistent partition, basement damp proof wall
G. Old building facade renovation, interior wall spacing, kitchen and toilet partition, etc
1. Lightweight: The partition board adopts many kinds of organic material and the admixture match into a slurry mixture, and then using high-tech to import the air bubbles in the mixture, forming numerous single micro bubble consortium, so the product is lighter than wood, can float on the surface of the water.
2. Fireproof: One of the main raw material is fire extinguishing agent, it can separate the Oxygen and prevent combustion. Non-combustion, strong fire-resistant and thermal insulation, the wall refractory limit of 90mm above 3hours, building fireproof rank can reach A level.
3. Sound insulation: Air layer is the best sound insulation material. The structure of our board contains single hole, double holes and three holes. Also added closed bubbles in the raw material. Its porosity can absorb sound wave, then the sound wave can consume the sound. Therefore, the board has the function of sound-absorbing and sound insulation.
4. Fast installation: Compared with the traditional masonry small wet construction, the large pieces of installation can increase the work efficiency more than 10 times.
5. Simple Structure, convenient adornment: Be cut wantonly, good nail-holding powder (directly drive nails or use pneumatic nail to fix the decoration materials).
6. Heat preservation: The thermal conductivity(W/m.K) of commonly used construction materials is separately about: Rock wool board 0.05, polystyrene board 0.41, aerated concrete block 0.19, two rows concrete block 0.68. The GM board is 0.034, which has the lowest thermal conductivity. It itself is a high-performance, inorganic heat preservation material, with highly saving rate, it’s the best wall material for energy saving.
7. Compressive, bending and impact: Add millions of Alkali resistant anticorrosive short fibers into the board, pulp and fiber coagulation after hardening can form a strong bond stress, it has the function of reinforcement, further increase the tensile strength and elasticity modulus.
8. Earthquake Resistance: The board is a flexible connection building components in aseismatic design, neither the stiffness nor the seismic capacity is concluded. Under seism action, due to the use of a U-shaped steel clips connector between surrounding walls and the subject wall, and strengthened by cross nails between every two panels, guarantees the board connection points rotating and ductility in the panel, to ensure that the wall can adapt shift between the main structure layer in different directions, the main structure deformation can meet the standard of earthquake fortification intensity.
9. Anti - tidal water: Our products add a special material invented by our company, making our products apart from other aerated wall materials, it doesn’t get damp or mildew in wet conditions. The use of modified admixtures, making the principal crystalline phase of our material from crystalline phase to gel type, reducing the activation of the substrate by contact with water etching, thus delaying the decomposition of the material to ensure that no expanded and no deformed by water erosion.
10. Pipeline installation: Water and wire tubes can be installed directly from the plate penetrates by partially opened a hole, reduce the labor cost for open slot, reduce the cracks and damage to the panels.
11. Long-distance transport: Each semi-trailer can carry about more than 700㎡, not overrun, not high, and high efficiency. At present, it’s the lowest cost of transportation loading and unloading wall materials in the market